Effectiveness of Project finance in wealthy countries Research Paper

Effectiveness of Project finance in wealthy countries - Research Paper Example Qatari oil and natural gas reserves are over 15 billion barrels and 26 trillion cubic metres respectively. Oil and gas revenue account for over 50 percent of its total GDP and 70 percent of all government revenues. Over 85 percent of all export earnings are from gas and oil. In fact, Qatar is the largest exporter of Liquefied natural gas (LNG). It is also the third largest country after Russia and Iran with largest gas deposits. In addition, Qatar relies heavily on foreign labour. Since oil and gas were discovered and extraction commenced in the 1950’s, Qatar’s economy has experienced high real gross domestic product growth rate each year. According to Blanchard, the country recorded 16 percent real gross domestic growth rate in 20102. Qatar is one of the richest countries in the world and has the highest per capita income in the Arab world. The GDP and per capita income was $128 billion and $67,000 in 2010 respectively. In addition, Qatari citizens and residents enjoy higher standard of living as compared to most countries in the world. Oil and gas sector generated over 70 percent revenues to the exchequer and the government does not levy income tax on all its citizens. According to CIA, the budget revenues and expenditures were estimated to be $47.32 billion and $31.61 billion respectively in 20103. Qatar has one of the lowest tax rates in the world, a situation that has attracted direct foreign investment. Furthermore, the country can grant t ax exception for about 12 years. Although economic growth and development is largely attributed to proceeds from huge deposits of oil and gas, the government has developed political, social, economic policies that promoted high levels of governance and transparency; reduced business process bureaucracies; and improve political stability, making it one of the stable Arab states in spite of political turmoil in neighboring Arab states. Economist, the World Bank and Transparency international have

African American Women Article Example | Topics and Well Written Essays - 1250 words

African American Women - Article Example Irrespective of their race, religion & class women were not seen as women in the society in the beginning of this century. The woman, often conceived and the childbirth have become dangerous. There was no birth control system in yester-years. The abortion was treated as an unlawful thing. During this century, the life styles of women have changed vastly. The activities of women have brought an important role in transformation of women. Many workingwomen have reached pinnacles in their selective fields. They have become champions in the fields of educational institutions, science and technology. Now the women are more economically stronger and independent than a century ago. The women are not involved in union activities.Now the black women in USA can exercise their franchise not like in olden days. Now the women are well educated and participated in national politics. The African American women were first employed in jobs during the currency of First World War. After the First World War, the services rendered by the woman were forgotten, as they did not enter into domestic service. The start of industries gave some opportunities to women to get good jobs with good returns. The involvement of women in second world war and the role played by them brought changes in awareness and consciousness within the women and the in the society too. The politicians thought of safeguarding the interests of women at their respective work place. The women desired to stick to their jobs by showing their individuality but some women wanted to come back to their domestic service. The work force of woman has largely increased in the year 1940 when compared to the work force of women in the year1939. After Second World War the need of education in higher education and technology has been increased for women after 1960, the entire world wanted to bring a change in inequality irrespective of their class, race and religion.The history of the African American women is the product of time of century old women. It is the growth of the African American women for the last 25 years, which focused on their memories, testimonies and pointing out women's experience. After events of revolution in 1968, the socialist feminism is possible once again the world, liberation of women in capitalism. At the end of 1960, the emergence of feminist framework and civil rights movement could be seen. In 1980s Thatcher and Reagan have elaborated the same. In both the countries of USA and Britain have contrasts of class, race, ethnicity, along with region, age and disability. The books did not carry a definite socialist analysis of the history of women in 20th centuries. The working class woman has not transformed the liberation of women forward. In 20th century, the women have achieved, in many nations, the right to vote, increased their changes in educational and job opportunities. Women used to feel wifehood and motherhood were most important events in their career. History shows that women is creative source of human life, women are always treated as inferior to men, since olden days. The attitude towards women was favorable in the east. In USA, the women were felt weaker than men as they couldn't do hard work which requires muscle power. In women, the Americans found lack of intellectual development. The women were allowed to attend domestic works such as caring of children, cooking cleaning of house and washing clothes. It was felt that women's main role in the society was to give birth to children. In the present scenario, because of major publicity to follow contraceptive methods

What Are The Uses Of Nanotechnology Environmental Sciences Essay

What Are The Uses Of Nanotechnology Environmental Sciences Essay Nanoscience and nanotechnology congers up visions of making, imaging, manipulating and utilizing things really small and the defining feature of nanochemistry is the utilization of synthetic chemistry to make nanoscale building blocks of different size and shape, composition and surface structure, charge and functionality[1]. The initial concepts of nanotechnology were decribed by Richard Feynman in 1959 when he gave a talk describing a process involving individual atoms and molecules that could be manipulated. Professor Taniguchi later helped define nanotechnology as a process involving separation, consolidation and deformation of materials on particles the size of an atom or a molecule[2]. The national nanotechnology initiative describes nanotechnology as the understanding and control of matter at dimensions between approximately 1 and 100 nanometres where unique phenomena enable novel applications[3]. The nanotechnology field is interdisciplinary and spans across physics, biology, chemistry, medicine, materials science and computing[4] and requires engineering at a nanoscale. A nanometre is equal to a billionth of a metre (10-9) and nanotechnology can be defined based on its scale being less than 100nm[5]. The science of nanoscale materials is said to fall between the extremes of 1nm and 1 Â µm lengths[1]. Nanotechnology incorporates science and technology to allow manipulation of atoms and molecules to create new systems, materials and devices with at least one feature of less than 100 nm in size. This provides the capacity to work at the molecular level, atom by atom, to create large structures with fundamentally new molecular organisation[6] which significantly contributes to enhanced material properties in physical, chemical and biological aspects as a result of their nanoscale caliber[6]. At the nanoscale materials have different properties; silver and gold nanoparticles hav e catalytic properties whilst pieces visual to the human eye are inert and unreactive. This is due to smaller particles having a much larger surface are to volume ratio and at sizes below 100 nm quantum effects become apparent. Fabrication on a nanoscale requires the use of molecules as building blocks. There are two approaches taken towards nanotechnology. The top-down approach uses conventional methods of micro fabrication extending them into the molecular size regime and includes electron beam and X-ray lithography. The bottom up approach incorporates the principles of self-assembly extending them from the molecular into the micrometer size regime which in a way mimics the way nature constructs biological systems and requires suitable building blocks. In 1959 hypothetical concepts and experimental results for nano-size materials and devices appeared, however the recent scientific developments have encouraged a revival of activity and created developments in the nanoscience field[1]. Nanotechnology has followed on from micro-engineering where tolerances of 10-6m have become common in the motor vehicle and aerospace industries allowing the manufacture of high quality and safer transportation. In the computing industry the miniaturization revolution has become most apparent. The worlds first stored-program electronic digital computer nicknamed the baby was built in Manchester in 1948 and had the processing power equivalent to that of a mobile phone yet the machine itself filled an entire room. Today the components of a computer have been de-scaled down to the size of a mobile phone and contain nano features, whilst they can process information much faster. Nanoscience is already a leading solution provider to many societal, health and environmental problems and due to its high potential for future developments it is attracting large amounts of funding. Nanotechnology has played a vital part in major revolutionary advances in medicine. Nanoparticles can be used to help faster detection of diseases. They are introduced into the body and bind to targeting antibodies which in turn will bind to the diseased cells and creates a fluorescent glow which can be detected by an imaging system which pinpoints the location of the disease from early onset. There are nano coatings that can repel dirt and prevent the spread of mrsa which has recently become a problem in hospitals. Nanotechnology is creating a path for faster diagnosis of disease and more accurate drug targeting using smaller quantities of drugs, hence reducing toxicity to the body. Looking from an environmental aspect nanotechnology is helping to develop cheaper and more efficient solar energy cells to be used in homes as a cleaner energy source. Nanotechnology is responsible for the production of environmentally friendly nanocoatings which are highly effective and not toxic to the environment, which can be used to replace toxic cadmium and chromium coatings that are currently used. There are nanocoatings which can protect materials making them more durable and resistant to scratches and graffiti. Nanoparticles can be used to invisibly tag things which make it easier for identification purposes and for crime prevention. Nanotechnology has allowed for tougher car tyres, improved sun creams, cheaper solar cells, stronger aeroplane wings, more sensitive and specific sensors, more efficient catalysts, hydrogen storage, tougher fabrics, new materials for sports equipment such as golf clubs and to reinforce the frames and strings on tennis racquets, intelligent glass for windows and glasses, flat screen TV screens among many other things. Carbon nanotubes are highly electrically and thermally conductive and have a tensile strength one hundred times stronger than steel whilst being a lot lighter. The highly desirable properties of carbon nanotubes allow tremendous future possibilities for aviation, military and medical applications. Carbon nanotubes and other materials such as plastics and textiles can be combined to produce lightweight bullet proof vests. Silver nanoparticles are present in socks and help combat bad odour by killing bacteria and this idea has been mimicked in dressing for wounds to keep them sterile. Nanotechnologies have enabled self-cleaning and dirt repellent clothes, which contributes to reducing the energy used to wash them. Nanotechnology developments in the pipeline include carbon nanotubes that can generate heat and may be ideal for electric blankets or as wall paper to heat cold walls and insulate homes. Research currently in process includes polymer based nanofibres that can be filled with nanoparticles, enzymes, catalysts, or an antibacterial. The nanofibres can be sprayed onto cut and wounds to activate the healing process or used to form temporary membranes or filters in the body. Nanoelectric devices have been embedded into textiles and can monitor internal temperature, chemical sensing and provide support for people that partake in extreme sports or for firefighters and other professions wherer this could be a vital piece of equipment. To support these nanoelectric devices research is being conducted on the viability of man made nanfibres which are used to present new properties such as shock absorbance, strength, heat stability and fire retardancy. Encapsulation is a process which increases th e performance or shelf like of a less stable substance and has been used in the nanoencapsulation of cancer drugs to increase their efficiency. It can help to deliver improved taste and protects food substances from harsh processing environments and in household cleaning products they can provide longer lasting scented household fragrances and also to help reduce energy and water use by slowly releasing enzymes in washing detergents. Nanoscale manufacture is already well established with food companies. Several foods and drinks comprise of natural nanoscale ingredients which can be manipulated which often happens in the manufacture of dairy produce[3]. Nanotechnology has been used to incorporate new tastes, flavours, physical effects and health benefits to foods as well improving food manufacture standards by being used to create antibacterial surfaces, packaging that is protected against contamination and special filters that can remove impurities and toxic chemicals[3]. Research in the motor industry is offering applications of nanotechnology to provide improved fuel cells for cleaner energy, more efficient catalysts, corrosion and scratch protection as well as stronger yet lighter engines and other motor parts. Nanoparticles are currently present as additives in fuels which enable lower fuel consumption and decrease any toxic emissions and research is being conducted to develop way in which nanotechnology coul d eradicate hazardous reactants and toxic emissions altogether. Cars are benefiting from nano-sensors which are reducing collisions and can detect part failures within the vehicles. The benefits surrounding the use of nanotechnology in our every day lives is endless, it is obvious that nanotechnology could shape the world of the future and contribute to developing a sustainable environment; maybe one day nanoscience could contribute to ending world hunger. Cancer could be eradicated as surgical procedures are carried out at the molecular level and eventually with nanosurgery everything could hopefully be repairable. However without the cycle of life and death the population on the world would increase to an unmanageable amount that would affect the sustainable environment we are supposedly aiming to achieve. Future developments of nanotechnology are totally unpredictable and the nanoscience phenomenon is still in its early stages. While the many benefits of nanotechnology are apparent, scientists are nervous about what the future may hold and concerns surrounding the ability to make materials come to life via means of reconstruction on the molecular level are most daunting. A particular concern is the development of nanorobotics that could potentially lead to nanorobots taking on human duties which would endanger and unbalance the world economy. However nanoscience is in the responsibility of the scientists and out of our hands for the time being, there are people who fear the future of nanotechnologies and there are those who are looking forward to their developments. Like with any new technology on the market, nanotechnologies also pose potential risks which need to be fully understood in order to optimize the advantages of using nanotechnology regularly. Once embedded in polymers nanoparticles are very safe, yet there is some uncertainty surrounding free nanoparticles and the health threats posed if inhaled. The government and the nanotechnology industry are extremely aware of the possible risks, it is not doubted that nanotechnology can bring profound benefits to society but these various applications of nanotechnology need to be supervised and maintained to safe and risk free level. Public concern surrounding nanotechnology is limited as a large population of the public have not yet heard of nanotechnology[7] and those who have dont fully understand what it actually entails[8-10]. A study in France confirmed that 81.5% of the participants had little or no knowledge about nanotechnology (table 1) [7]. Social scientists have researched what influences public perception of new up coming technologies like nanotechnology[11]. A recent study in March 2011, Comparing nanoparticle risk perceptions to other known EHS risks has concluded that the public are relatively unconcerned about nanotechnology risks and the risks of nanotechnology perceived by the public are relatively low compared to other health and environmental risks ( fig 1.)[9]. In this study the public have ranked street drugs as the highest posed risk followed by smoking, AIDS, nuclear waste and obesity. Nanoparticles have been ranked on the low end of the scale, 20th out of 24, along with X-rays, air trave l and mobile phone use[9]. Fig.1. Rankings by high health risk perceptions[9]. A survey of the public perceptions about the use of nanotechnology in foods and food packaging concluded that the public are ambiguous and pessimistic surrounding applications in the food industry[7]. However the study only surveyed 752 individuals, so this is not a true and fair representation of the views of the public world or UK wide. The study titled The public understanding of the food domain was carried out in France and revealed that the general consensus of the participants was that they were doubtful about nanotechnology in food and food packaging and hence viewed that the benefits equalled the risks[7]. However as the percentage of unfamiliarity surrounding nanotechnology of the participants was extremely high[7] it could be argued that with more understanding of the topic participants and also the rest of the public would be more swayed to support nanotechnology if they were more informed of the benefits and risks. The unknown causes people to be doubtful and cynical and view something they have no knowledge about in a negative light. Evidence suggests that the public however perceive nanotechnology to pose more of a risk than experts do but generally the public believe that the benefits associated with nanoscience outweigh the impact of risk[10, 12]. Table 1. Frequencies and percentages: nanotechnology food packaging (nano-outside), nanofood (nano-inside) and nanotech familiarity (N=752) [7]. After the public backlash against genetically modified foods the public perceptions of new and emerging technologies are highly valued and extremely important and need to considered fully[13]. Given the important and lucrative benefits of nanotechnology for the future the public need to be made fully aware of the advantages before they make negative judgements themselves based on their lack of knowledge surrounding the topic. Uninformed people will automatically have a negative biased opinion of new technology if they are not slowly introduced to the idea and made aware of the advantages before they hear about the minor risks and pass judgement themselves. People in industry fear that without more research and public awareness there may be an outcry against their use of nanomaterials[14]. It was reported that increased education on new technologies led to increased public anxiety of the subject[15]. Will giving the public more information, provide them with more ammunition for a repeat of the public out cries against genetically modified foods and gene technology. Communication between the public and decision makers in nanoscience and the government needs to be established sooner rather than later to gain the public approval and to ensure there isnt a repeat performance of the GM food backlash[13]. Already public protestors present at Nanotechnology debates held in France in 2010 chanted Nano, its not green, its totalitarian[16]. Public perception depends upon the type of utilization surrounding the new technology [17] and most of the time applications involving food and medicine are considered to cause the most controversy in the public eye[18, 19]. A Royal Commission on Environmental Pollution in the UK found no evidence that nanomaterials have harmed people or the environment, but recommended further research and evidence to confirm this[14]. The public need to hear positive evidence surrounding the safety of nanotechnology maybe before they are introduced to current and future developments. Public concern includes whether manufacturers and industry will benefit more in terms of revenue from nanotechnology than the consumers[20]. The concern over nanotechnology in food is more of a worry to the public than its use in packaging which is deemed to be quite useful in fact [20]. Titanium-dioxide, one of the most commonly used nanoparticles used in consumer products such as sun creams [21] has recently been slated after finding that Titanium dioxide nanoparticles caused chromosomal damage, as well as inflammation, all of which increase the risk of cancer when tests were carried out on mice[22]. However a year later the same source of information, UCLAs NanoSystems Institute revealed how nanoparticles have been used in the delivery of cancer drug therapy in mice[23] which could have huge potential in the development of human anti-cancer drugs. As of yet the various warnings against nanotechnology can not be justified as there is a lack of concrete evidence to support such claims against nanotechnology. According to new laws from the European Parliament cosmetics containing nanomaterials will have to be duly labelled and the new regulation states Nanomaterials: labelling, definition and safety assessment needed[24]. After Germanys Federal Environment Agency revealed a report about nanotechnology[25] which consequently lead to media headlines reading The German Environment agency warns against nanotechnology and Nanotechnology can make you sick[26] the environment agency retaliated by declaring that we havent done any of our own research and as a result feel the report has been misinterpreted [27]. This is an example of fabrication of warnings against nanotechnology and without adequate evidence the public misconception with regards to new nanotechnology will continue. A report published in 2010, Report on the European Commissions Public Online Consultation towards a Strategic Nanotechnology Action Plan concluded a number of points related to public concerns with regards to nanotechnology amongst other cohorts[28]. The majority public opinion on nanotechnologies was reasonably optimistic and not a single person voted opposed towards nanotechnologies (fig). The public perceived food and healthcare to be most at risk with respect to nanotechnology (fig). Toxic nanomaterials and the nanomaterial workers health were both highlighted as being the most important major issues the public had concern over (fig). The general consensus across all areas questioned was that more action needed to be done with regards to the EU Policies in the new action plan. The areas highlighted the most included addressing safety concerns, developing better tools and adapting existing nanomaterial legislation (fig). Fig.[28] Fig. [28] Fig. Public concerns about the current state of development of nanotechnologies[29]. Fig. [28]

Southwest Marketing Strategy Essay -- essays research papers

Southwest Airlines is the industry leader in low cost airfare. They began its operation in 1971 with three Texas based routes and began interstate routes in 1978. When Southwest entered the market in 1971 they employed a market penetration pricing approach. They wanted to provide the best service for the lowest possible price. They saw that if they cut out certain unnecessary benefits they could lower their ticket price to a level far below that of the competition. They do not have in flight movies, meals, or first class sections. This strategy has been very cost effective and Southwest passes the savings on to the customer. They chose to focus on pleasure travelers and low-income travelers opposed to business travelers. This allowed them to take advantage of a market, which was often ignored by other airlines. Southwest is not concerned with the prices of other airlines. They do not engage in pricing to meet competition, or pricing below competition. CEO Herb Kelleher stated, â€Å"We’re not competing with other airlines. We’re competing with ground transportation.† This philosophy has led them to be very successful because they are priced below the competition, but don’t raise their prices when the competition does. Cost controlling is very important in the airline industry. Southwest is very good at controlling their costs. They offer a no frills service for people who want to get to their destination for as little as possible, and are not concerned about the bells and whistles like in-flight movies. Southwest also realized that when their planes are on the ground, they aren’t making money. They decided to keep their planes in the air as much as possible and have worked hard to keep a low turnaround time. They manage to unload passengers and load new passengers for the next flight within twenty minutes, which is shorter than the industry average. Southwest also uses only one kind of plane, the Boeing 737, in order to reduce costs of parts and training employees to use different types of planes. All of these methods have lowered the cost of operations for Southwest and allowed them to have a profit of $4.7 billion, which is twice that of United Airlines. And because they are so efficient they can pass the savings on to customers. There is no first class at Southwest and therefore all the customers are treated the same. They all receive the same level of atte... ...ly buy Southwest’s inexpensive tickets. College students also aren’t concerned about in-flight movies, meals, or other perks. Southwest would crush the competition in that route and make a large profit. Even families going on vacation would fly Southwest Airlines to Mexico. It is cheaper than other major airlines and it is a respected airline, unlike some no name airlines that run flights to Mexico. Advertising would be best done on television because America has become lazy and watches too much TV. They should advertise their great customer service by having customer testimonials and pictures of smiling customers and employees. They should also advertise during family oriented shows, because they are a form of inexpensive travel that a family could take advantage of. In conclusion, I feel that Southwest has taken advantage of its inexpensive flights and family oriented atmosphere to prevail despite the September 11th tragedy. Southwest has been a profitable business for 26 consecutive years and has twice the profits of United Airlines. They have been doing a great job providing customer service and will continue to be successful as long as they continue with their current plan.

Should Doctors Help Patients Die?

Physician assisted death has always been a controversial issue in the United States that some view as a moral, ethical, religious, and legal issue. In any discussion about physician assisted suicide it is important that the terminology is clear. Physician assisted death is the procedure that a patient dies as a result of the voluntary ingestion of a fatal dose of medication that a physician has prescribed for that purpose. Assisted death is distinguished from euthanasia in that it necessarily involved an individual who is capable physically of taking his or her life and does so with means provided by another person.Physician assisted death was legalized through Oregon’s death with Dignity Act in 1994 and enacted in 1997. This act allows terminally ill patients to obtain and use prescriptions to self-administer lethal doses of medications. Although it is still rare in the state, between fourteen and forty-six people die each year by physician assisted death (PAD). Oregonâ€℠¢s Death with Dignity Act allows us to evaluate the law assessing the arguments towards whether or not physician assisted death should be legalized.Most of Oregon’s health’s professionals may agree with the patient’s request but they lack intimate knowledge on their values and reasoning for their choices. The organization, Compassion and Choices of Oregon, is dedicated to expanding the choices at the end of life, and offers guidance and support to those who qualify for physician assisted death. Compassions and Choices of Oregon, evaluates feedback from family members to obtain information on why they felt their family members decided to fulfill their PAD request.According to families results, with the top median score, the most important reasons patients pursued PAD request, patients wanted to control the circumstance of death and die at home, they worried about loss of dignity, future loss of independence, quality of life, and self-care ability. Ganzini, Goy, & Dobscha propose if there is better end of life care in homes helping patients maintain control, independence, and self-care in a home environment this may be en effective means of addressing some serious request for physician assisted deaths.Interventions can help patients determine if they can deal with symptoms and make them feel more comfortable helping them to make their decision. Some argue that patients are depressed; lack social support, and vulnerable groups turn to PAD as their only last option. Although the Death with Dignity Act empowers individuals to control the timing of their death, physician assisted death still remains a controversial topic in today’s society that raises many ethical questions. Choosing their circumstances of death.The Oregon act went through many obstacles when implementing the law to make safeguards to ensure that the law provides requirements so that it will not be abused. A major concern is about laws allowing physician assisted death is that they would open floodgates of people requesting such assistance, therefore causing a â€Å"slippery slop effect†. â€Å"The Health Division Report indicated that in 1998,23 people received such prescriptions, 15 of whom used them in hastening death during a person in which approximately 28,900 people died in Oregon. These numbers suggest that only an extremely small percentage of people (. 5% or 5 people in 100,000) who dies in Oregon received assistance under the act. â€Å" (Batavia, 2000). Patients who are applying for the use of physician-assisted death will have to follow strict regulations and have physicians, therapist, and family members consent to the choice of the patient. All patients and health care professionals have to commit that they will be in full compliance with the law and follow the procedures. Debates over the PAD also often warn of a â€Å"slippery slope† predicting abuse of vulnerable groups such as poor people, minorities, depression, w omen, and uninsured individuals.Depression can often develop among terminally ill patients when they start to loss their ability to care for themselves. According to Gazini, Goy, & Dobscha (2007) study on family members show no indication that the desire for hastened death has no association with depression or depression disorder. Oregon’s law requires that the patients must have a mental health evaluation to make certain that they are not suffering from any mental illnesses. Battin, et at, (2007) research the different vulnerable groups showing that there is no heightened risk among uninsured people, women, elderly, poor, and low educational status. Terminally ill college graduates in Oregon were 7. 6 times more likely to die with physician assistance than those without a high school diploma. † The research is completed among people living in the Netherlands and Oregon where physician assisted death is legal and practiced. From data of patients over the years they show no increase among requests among vulnerable groups. One of the most obvious arguments is that health care providers are supposed to save lives—not take them. (de Vocht & Nyatanga, 2007). The Hippocratic oath is one of the oldest documents that are still sacred by physicians.It was created to ensure that health care professionals would treat the ill to the best of their abilities, protect the privacy of their patients, and teach the secrets of medicine to future generations. â€Å"I will use those dietary regimens which will benefit my patients according to my greatest ability and judgment, and I will do no harm or injustice to them. † The Hippocratic oath is a doctors contract, in other words this statement can be interpreted as â€Å"do not harm. † Helping a patient take their life is a contradicting question if physicians are violating the Oath.Is a doctor assisting harm on a patient if they choose physician assisted death? Or is it causing harm to a patient to keep them alive suffering if they wish different? â€Å"Nurses witness firsthand the devastating effects of debilitation and life-threatening disease that are often confronted with the despair and exhaustion of patients and families† and â€Å"at times, it may be difficult to find s balance between the preservation of life and the facilitation of a dignified death† (ANA, 1994) Terminally ill patients are given medication to treat and relieve them from the pain of the illness.Patients go through the stages of disease that health care professionals do not have medications that will relieve them of all their symptoms, pain, and harm, but they do have medications they will allow patients to end the harm and choose their death. Physicians have the right to administer medications to allow patients chose their death. Increased doses of controlled substances allows the patients to die at peace and the way they choose instead of suffering in the last phases of life. The Hipp ocratic oath also allows health professionals to use their judgment when treating patients.Under the Oregon Death with Dignity Act physicians have to sign off that the patient is suffering and terminally ill, if a doctor feels that they can preserve the life of the patient they have the right to use their judgment to refuse to participate in the PAD. This is their moral right to decide if they are willing to prescribe medications to a request PAD patient if it is legal in the state. This is a time where physicians need to know how to â€Å"switch their focus from quantity, to quality of life†(LaDuke, 2006).Health care professionals should not feel quality for completing the desires of patients and doing their job. Ganzini, Goy, & Dobscha, (2007) purpose that if clinicians should focus on improving end of life care addressing worries and apprehension about the future with the goal of reducing anxiety about the dying process. Addressing patients concerns we can create intervent ions to help along the process. In contrast, patients who request Death with Dignity are already in high-quality palliative care. We assume they hospice programs have little to do with the patients assisted death choice.Most patients have already made up there minds whether they have been in hospice care or not. Although hospice care can improve ones quality of life, it still does not change the patients choosing their circumstances of death. By any standard the first year of the Oregon Death and Dignity Act would be considered a success. This success has made other states look into legalizing physician-assisted death. In 1997, the court case Washington v. Glucksberg decided that Oregon’s Death with Dignity Act would go into effect. Eleven years later others states followed the suit, through different approaches. In 2008, Washington voters adopted a right to die initiative and a Montana judge ruled that individuals had the right to hasten their death under the states constitu tion. † (Kirtley, 20011). Supporters of the Washington Death with Dignity Act organized a committee of supporters. This committee felt their chances of success were good because of similar demographics in Oregon and Washington. The eleven years between the passings of Oregon’s Act allowed people of Washington consider the facts and make their own approach to the purposing of the Act.Novembers 2008 Washington voters approved the Death with Dignity Act, and people claimed â€Å"other states would fall like dominoes†. Following in Washington’s footsteps, a month later Montana legalized hastened death. The Montana Supreme court ruled on December 31, 2009 that nothing in the state constitution prevented patients from hastening their deaths and gave doctors the right to prescribe lethal medications. Americans now have more options for dying than they did in 1997. We know have Hospice, Palliative care, hysicians can legally pursue aggressive pain management, and states can now pass aid in dying laws. Patients may discontinue life-sustaining therapies, or voluntarily stop eating and drinking as a natural part of the dying process, and lethal prescriptions. Most important we are allowing patients to have choices to allow them to deal with their end of life care and how they wish to die. In the book Narrative Matters there is a story about a young doctor Alok Khorana who is coming to the end of his shift after working long hours to save up time for her wedding the next day.Alok is faced with a tough situation when Mr. Kohl comes in one of his patients and has to consider end-of-life decisions. Mr. Kohl her patient is a 53 year old white male, Vietnam veteran, steel plant worker, smoker, lung cancer, that has failed two different chemotherapy regiments and his last few scans have shown and impressive disease progression. Mr. Kohl had attended a doctor’s appointment and the doctor noted shortness of breath and the need of urgent hospital care. In medical terms this means it is basically better of that he would die in the hospital and should have been on hospice care.Alok is trying to talk the man into considering a DNR and let him know that this he might not make it much longer than a day or two. Mr. Kohl does not have any children and just has a wife named Ann. As much as Alok tries to convince Mr. Kohl to consider DNR he will not even consider it because he promised Ann he would not go without seeing her. They monitor him for a few hours trying to keep him as pain free as he can. The nurses and staff let the man know that there will not be a lot they can do for him with all of his health conditions and him suffering from pneumonia.They provide him with information about DNR and how they think it will be his best choice. He will not give in and says he is not giving up he told him wife he will do everything he can. After some time Mr. Kohl’s lungs begin to collapse and he is hooked up to a ventilation machin e to help his lungs work correctly. As his wife Ann is on her way he than is given the option to be administered enough oxygen to keep him a live without a machine for a little longer. Mr. Kohl knows what is about to happen to him, and how his medical condition cannot be reversed.He decides to hang on and do what ever he can for the love of his wife. He promised her he would be able to see her before he goes, and than he will be ready to die. Although Mr. Kohl did not receive a physician assisted death procedure, he shares a lot of the same concerns that was researched for why patients decide when they are ready to die. Mrs. Kohl finally shows up to the hospital clasps his hands tightly, the heart monitor machines are shut off, and the morphine is administered for comfort. Mr. Kohl’s breathes start to slow down and he drifts into sleep.Alok the doctor on duty witnessed a powerful life story that night on her shift. On his way home the day before her marriage she looks over Mr . Kohl’s struggle to hang on for life. Although he was aware of his conditions and that he will not make it much longer he wanted the comfort of his wife. Alok realizes that after years of struggles with his soon to be wife one day when he is dying, she will come in and tell him its OK to die. He will listen, and it will be okay. For many patients who consider physician-assisted death there main reasons are to control there situation of death.Mr. Kohl was so persistant on not choosing DNR because he just wanted to control his situation and wanted his wife to be on his side. Once she was there he made his decision and he than was ready to go. Physician assisted death will always be a contradicted topic when discussing the tampering of a human life, but it is present that this Act has had no present negative effects. When laws are set up to assist patients desires to choose the end of life care, physicians should feel they are following patients request and their job, they have the right to help patients choose their death.Legalization has to protect both of the rights of terminally ill patients who wish to die, and patients who do not. This will always be a sensitive that will differ with each state exploring the aspects of moral, ethical, and legal concerns. Work Cited Ganzini, L. , Goy, E. , & Dobscha, S. (2008). Why Oregon patients request assisted death: family members' views. Journal Of General Internal Medicine, 23(2), 154-157. Battin, P. M. , Heide. A. , Ganzini, L. , Wal, G. , ; Onwuteaka-Philipsen, B. P. (2007) Legal physician-assisted dying in Oregon and the Netherlands:Evidence concerning the Impact on Patients in â€Å"Vulnerable† Groups. Journal of Medical Ethics,33(10), 591-597. Batavia, A. I. (2000). So far so good: Observations on the first year of Oregon's Death with Dignity Act. Psychology, Public Policy, And Law, 6(2), 291-304. Mathes, M. (2004). Ethics, law, and policy. Assisted suicide and nursing ethics. MEDSURG Nursing, 13(4 ), 261-264. Howard, R. J. (2006). We Have an Obligation to Provide Organs for Transplantation After We Die. American Journal Of Transplantation, 6(8), 1786-1789.

Islam spread rapidly Essay

I went through various different websites on the internet trying to find out why Islam was spread so rapidly, I found so many diverse answers, but the most answer that I kept on finding was ‘The Sword’. The sword is when Muslims give non-Muslims two options, either they convert to Islam or they have to face death. Some believed that Prophet Muhammad, peace upon him, was a violent man, who forced non Muslims into Islam. They also believe that Early Islam was less tolerant to other religions, other than that they believe that Arabs and Muslims in General hated Christians and Jews, and wanted them to Vanish from earth. I disagree with what I’ve read. Prophet Muhammad was known for his kindness and his respect for other religion, adding to that, he tried to follow the steps of the prophets that came before him, and he admired them. His main idea was to spread harmony between all religions and to create peace. Muslims have not forced others into Islam and didn’t kill non Muslims because they wouldn’t convert. Prophet Muhammad had announced to non Muslims that they only have to pay taxes if they didn’t want to convert, other than that they were treated respectfully by Muslims and others. Also, I’m not the only one who is disagreeing with such things. The webpage that I attached in the end of this paper also tries to show that Islam being spread by the sword is only a Myth. In the Western Civilization volume one book, starting from page 252 it speaks about how Islam was spread. It states that Islam was spread because of its harmony and tolerance also because of the Prophet Muhammad great personality, and not to forget about the holy wars and Abu Baker. Those had a huge impact on non Muslims who converted to Islam. The message of Islam in early days was rapidly spread through the Middle East, North Africa, Spain, West Africa, East Africa, Eastern Europe, Asia Minor, the Caucasus, Central Asia, Afghanistan, India, Western China, and the Malay Archipelago. They all converted to Islam not because they were forced to, but because they have learned and saw how real Muslims acted and were. Prophet Mohammed has introduced Islam in a very lovable way, He faced difficulties, such as hater from Qurish, people threw rocks at him, and he was cursed and hit many, many times, however, he didn’t stop. He continued spreading the Islam. A lot of people followed him and supported him, until the day of his death. After the prophet, peace upon him, passed away Abu Baker was firmed in spreading Islam around the world. Abu baker was declared as the caliph, and the second-in-command of Mohammed. He created a powerful military that restrained all the Arab trips that didn’t accept successor’s establishment. Other than that, his force of military started to slowly move further than the borders of Arabia. Not to forget to mention that Arabs were not interested in conquering other cities because they wanted to spread Islam. Arabians actually hoped that the cities they conquered wouldn’t convert to Islam, so Arabians could preserve their own individuality as a society of leaders and tax gatherers. Anyhow, Arabia was mostly interested in conquering other cites for the wealth and the power, and as I mentioned earlier, not to spread Islam. There were a lot of weak cities beside them that motivated the Arabs to start conquering, also, the idea of new riches played a huge part. There are a lot of reasons why Islam spread so fast, other than the ones that are already mentioned in this text or the webpage that is attached to this paper. People need to know the truth about Islam, and nee to stop judging it based on Myths and lies.